A-Level Physics Definitions Checklist: Key Terms by Topic and Exam Board
A-level physicsdefinitionskey termsexam practiceretrieval practicepast papersexam boards

A-Level Physics Definitions Checklist: Key Terms by Topic and Exam Board

SStudyScience Editorial Team
2026-11-18
8 min read

Track and test essential A-level Physics definitions by topic, with units, common wording errors, contrasts and a practical correction log.

This A-level Physics definitions checklist gives you a practical way to learn, test and monitor the key terms that appear across mechanics, materials, waves, electricity, fields, thermal physics and nuclear physics. Use it alongside your own AQA, Edexcel or OCR specification, because the exact required wording, symbols and topic boundaries can vary between exam boards.

Overview

Definitions are easy to underestimate in A-level Physics. A formula may help you calculate momentum or electric field strength, but an exam question can also ask what the quantity means, what it is measured in, or how it differs from a related idea. Precise terminology supports calculations, explanations and longer written answers.

Do not treat this page as a replacement for your specification. Instead, use it as a revision tracker. For each term, first cover the definition and write it from memory. Then compare your answer with the checklist, correct any missing idea and test yourself again later. A strong definition usually identifies the quantity clearly, states the relevant condition and uses the correct unit where appropriate.

Words such as per unit mass, per unit charge, rate of change, in a particular direction and at constant temperature can change the meaning of an answer. Learn the distinction between a definition and an equation: an equation may calculate a quantity, while a definition explains what that quantity represents.

What to track

Use the tables as a topic-by-topic checklist. Tick a term only after you have recalled it without looking. The units shown are SI units commonly used in A-level Physics; always follow the units and conventions required by your specification and question.

Mechanics and materials

TermDefinition or essential meaningUnit and common trap
DisplacementDistance travelled in a specified direction; it is a vector.m. Do not define it as total distance.
VelocityRate of change of displacement.m s-1. It has direction.
AccelerationRate of change of velocity.m s-2. It can occur when speed is constant if direction changes.
MomentumMass multiplied by velocity.kg m s-1. Momentum is a vector.
ForceAny influence that can change an object's momentum.N. Avoid saying force is simply a push or pull in an exam definition.
ImpulseChange in momentum.N s or kg m s-1. It is not the same as force.
Work doneEnergy transferred when a force moves its point of application in the direction of the force.J. Include the direction condition.
PowerRate of doing work or transferring energy.W. It is not simply the total energy transferred.
DensityMass per unit volume.kg m-3.
StressForce per unit cross-sectional area.Pa. It describes the applied force divided by area.
StrainExtension per unit original length.No unit. It is a ratio.
Young modulusThe ratio of tensile stress to tensile strain, provided the material remains within the region where this relationship applies.Pa. Do not confuse it with stress alone.

Waves and quantum ideas

TermDefinition or essential meaningCommon wording check
Progressive waveA wave that transfers energy and information from one place to another without transferring matter overall.Particles may oscillate, but they do not travel with the wave overall.
WavelengthThe shortest distance between two points in phase, such as adjacent crests.m. It is not always the distance between any two crests unless they are adjacent.
FrequencyThe number of complete oscillations passing a point per unit time.Hz, equivalent to s-1.
Phase differenceA measure of how far one point in an oscillation cycle is ahead of or behind another.Degrees or radians. State the separation as a fraction of a cycle when useful.
CoherenceA fixed phase difference exists between two waves, and they have the same frequency.Both conditions matter for sustained interference.
PolarisationThe restriction of oscillations to one direction or plane.Transverse waves can be polarised; longitudinal waves cannot be polarised in this way.
PhotonA quantum, or discrete packet, of electromagnetic radiation.Its energy depends on frequency.

Electricity and circuits

TermDefinition or essential meaningCommon wording check
CurrentThe rate of flow of charge.A. Do not say current is the amount of charge.
Potential differenceThe energy transferred per unit charge passing between two points.V or J C-1. It is measured between points.
Electromotive force (emf)The energy supplied by a source per unit charge passing through the source.V or J C-1. Emf is not a force measured in newtons.
ResistanceThe ratio of potential difference across a component to the current through it.Ω. A component's resistance may change with conditions.
ResistivityA property of a material defined as the resistance of a specimen of unit length and unit cross-sectional area.Ω m. It is a material property, unlike resistance.
Internal resistanceThe resistance within a source that causes energy to be dissipated inside the source when current flows.Ω. This produces a lost volts or terminal-potential-difference effect.

Fields and thermal physics

TermDefinition or essential meaningUseful contrast
Gravitational field strengthForce per unit mass acting on a small test mass placed in the field.N kg-1. It is not the same as gravitational potential.
Electric field strengthForce per unit positive charge acting on a small test charge placed at a point.N C-1. Specify a positive test charge.
PotentialPotential energy per unit mass for a gravitational field, or potential energy per unit charge for an electric field, relative to a stated reference.Be clear whether the field is gravitational or electric.
Absolute zeroThe lowest theoretical temperature, at which particles have minimum possible internal energy.Use kelvin for absolute temperature calculations.
Specific heat capacityThe energy required to raise the temperature of unit mass of a substance by one degree.J kg-1 K-1. Identify the substance.
Specific latent heatThe energy required to change the state of unit mass of a substance without changing its temperature.J kg-1. Name the change of state where relevant.

Nuclear and particle physics

TermDefinition or essential meaningCommon wording check
IsotopeAtoms of the same element with the same number of protons but different numbers of neutrons.Same proton number, different nucleon number.
ActivityThe number of nuclear decays per unit time in a sample.Bq, equivalent to s-1.
Half-lifeThe time taken for the activity or number of undecayed nuclei in a sample to fall to half its initial value.Do not say all nuclei decay after one half-life.
Binding energyThe energy required to separate a nucleus completely into its individual nucleons.It is also the energy released when the nucleus forms from separate nucleons.
AntiparticleA particle with the same rest mass as its corresponding particle but opposite values for certain conserved quantities, such as charge.Do not describe it simply as a particle with negative charge.

High-value contrasts to test separately

  • Mass versus weight: mass is the amount of matter and is measured in kilograms; weight is the gravitational force on a mass and is measured in newtons.
  • Distance versus displacement: distance is a scalar total path length; displacement is a vector change in position.
  • Speed versus velocity: speed is the rate of change of distance; velocity is the rate of change of displacement.
  • Emf versus potential difference: emf describes energy supplied per unit charge by a source; potential difference describes energy transferred per unit charge between two points or across a component.
  • Resistance versus resistivity: resistance depends on a particular component's dimensions and material; resistivity is a property of the material.

Cadence and checkpoints

Definitions become reliable through repeated retrieval rather than one long reading session. Add a short definitions review to your normal A-level Physics calculations practice and use the following cycle:

  1. After first teaching: write each new definition from memory, then check the specification wording and table.
  2. Within a week: shuffle the terms and recall them without keeping topics in their original order.
  3. Before a topic test: complete a timed blank-page checklist. Include units, symbols and one contrast term.
  4. After marked questions: record definitions that caused a lost mark or led to an unclear explanation.
  5. Monthly or each half term: retest the full list, concentrating on terms marked as uncertain rather than rereading every entry equally.

For past paper practice, do not look up a definition as soon as you forget it. Put a question mark beside the term, finish the paper, then correct it. This shows whether the problem is recall, interpretation or application.

How to interpret changes

Your checklist is more useful when it records the type of error, not just a tick or cross. Use a correction log with four columns:

Date and topicTermWhat was missing or wrong?Corrected version and next test
Example: ElectricityPotential differenceWrote “energy transferred” but omitted “per unit charge”.Rewrite from memory in three days; use in one circuit question.
Example: MechanicsImpulseConfused impulse with force.Recall “change in momentum”; compare units and test next week.

If you repeatedly miss the same phrase, make a smaller cue card containing only the essential distinction. If you know the wording but lose marks in questions, practise applying the term to diagrams, practical contexts and unfamiliar situations. If your definition is accurate but the unit is wrong, add a separate units checkpoint rather than relearning the whole definition.

Exam-board wording should be checked against your current specification and mark schemes. AQA, Edexcel and OCR may use different topic labels or emphasise different examples, while the underlying physics remains closely related. Keep a note of your board and specification version at the top of your checklist.

When to revisit

Revisit this checklist before every topic test, after completing a set of topic-by-topic past paper questions, and before full A-level Physics papers. A useful final check is to choose ten terms at random and explain each aloud without reading. Then choose three related pairs—such as mass and weight or emf and potential difference—and state the difference in one sentence.

Update your personal version at the start of each academic year and whenever your teacher identifies a specification, symbol or terminology change. Also refresh it after examiner feedback or a marked paper reveals recurring wording problems. Keep the correction log, because previously missed definitions are the terms most worth revisiting.

Next step: copy the topic headings into a notebook or spreadsheet, hide the definitions and test yourself today. Mark each term as secure, uncertain or not recalled. Schedule the uncertain and not-recalled terms for a second test, then use one past paper question to confirm that you can apply the language as well as repeat it.

Related Topics

#A-level physics#definitions#key terms#exam practice#retrieval practice#past papers#exam boards
S

StudyScience Editorial Team

Science Revision Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.